While OSHA did not adopt this requirement, it merits your consideration. People with only one eye do not generally have good depth perception; this could be a most important and critical matter in some industrial operations. You, as an employer, must determine if full vision is mandatory in your operations.
What can you not do with a forklift?
Forklift operators should never:
- Raise or lower loads while the forklift is moving and especially not while turning because it makes the forklift very unstable. …
- Allow anyone to stand underneath or right next to raised forks. …
- Carry a load with only one fork as it stresses the carriage.
Can you operate a forklift with one hand?
It is important for forklift operators to be able to:
Use one or two hands to grasp, move, or assemble objects. See details of objects that are more than a few feet away. … Adjust body movements or equipment controls to keep pace with speed changes of moving objects.
Can a deaf person operate a forklift?
A deaf person can drive a forklift as long as their doctor determines that he or she is capable of safely doing so. In order to safely leverage a lift, however, a deaf person may require a hearing aid.
How should you normally drive your forklift?
To reduce these hazards, follow these requirements and recommendations:
- Always drive unloaded forklifts with the forks downgrade.
- Never drive a loaded forklift with the load downgrade.
- When driving up a ramp, drive loaded forklifts forward with the load upgrade.
Is it safe to drive a forklift backwards?
“It would be, in my opinion, a very dangerous way to drive a forklift for a long period of time,” Iunker said. Driving in reverse while looking backward would cause the steering wheel to move more than intended, making it very hard to control, he added.
How high should forks be when driving forklift?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy.
What are the 7 classes of forklifts?
The 7 Classes of Forklift Trucks
- Class 1: Electric Motor Rider Trucks.
- Class 2: Electric Motor Narrow Aisle Trucks.
- Class 3: Electric Motor Hand or Hand-Rider Trucks.
- Class 4: Internal Combustion Engine Trucks—Cushion Tires.
- Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.
When should you drive backwards on a forklift?
The driver will slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver will be required to travel in reverse, with the load trailing. 29.
What class is a sit down forklift?
Class IV forklifts are internal combustion engine cushion tire trucks. This class of sit-down forklifts is designed for indoor use. Class IV forklifts are powered by internal combustion (IC) engines that run on diesel fuel, LP gas, gasoline, or compressed natural gas.
Is it law to wear a seatbelt on a forklift?
Since 2002, counterbalanced trucks, rough-terrain trucks and side-loading trucks, one side only, must be fitted with an operator restraining system (for example a seat belt).
Should forklift drivers wear hearing protection?
Recommended ear protection
All forklift operators are required to wear either ear plugs or ear muffs, as they can reduce noise by 30 decibels. … Wearing ear plugs or ear muffs will reduce sound to a safe level while still allowing you to hear your surroundings.
Do you need a medical to drive a forklift?
Before operating forklifts (FLTs) you should undertake a medical with a registered Doctor to ensure you are fit to drive ‘rider operated lift trucks’.
Is forklift driving easy?
Just like an ordinary sedan car, a forklift can be fairly easy to operate. It only takes short time and little practice for you to get a grasp of it. But make no mistake, just because it is easy to operate, does it mean you will put your guard down. ALWAYS prioritize safety when driving a forklift.
Why are there 3 pedals on a forklift?
To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.
What are 3 fluid levels that need to be checked before using the forklift?
Check of liquid Levels:
- Hydraulic fluid.
- Brake fluid.
- Engine oil coolant.