Some safe work practices to ensure safe, stable conditions for scissor lift use include: … Never allow equipment other than the scissor mechanism to be used to raise the work platform (e.g., using a forklift to lift the work platform). • Keep the lift from being struck by other moving equipment on the worksite.
What is a scissor forklift?
Providing a safe, steady enclosure and a rising platform, a scissor lift helps workers accomplish precise tasks at high elevations, from close inspections to cable wiring. A scissor lift is a type of construction lift, which is machinery equipped with a platform to elevate workers and loads to high areas.
Can you use a forklift to lift a person?
The OSHA rule for forklifts at construction sites at 29 CFR 1926.602(c)says trucks with lifting carriages or forks for lifting personnel must use a safety platform firmly secured to the lifting carriage or forks. … Rough terrain forklifts shall not be used to lift personnel unless there is no other practical option.
Does OSHA require tie off in scissor lift?
Question 2: Are employees required to be tied-off when working on a guardrail-equipped scissor lift platform that extends beyond the wheelbase of the lift? Answer: No, neither §1926.451 or §1926.452(w) require employees to be tied-off when working from scissor lifts that have properly maintained guardrails.
What can you not do with a scissor lift?
Scissor Lift Safety Hazards to Avoid
- Open gates Is a Scissor Lift Safety Don’t. …
- Ladders or Step Stools in the Basket Is a Scissor Lift Safety Don’t. …
- Climbing onto or Leaning too Far over Guard Rails Is a Scissor Lift Safety Don’t. …
- Making Bodily Contact with Electrical Conductors or Entering the Induction Field.
Are scissor lifts dangerous?
Scissor lifts can be especially dangerous if used improperly. … When aerial work platforms are used correctly, they are not dangerous. Often times they are set up on uneven ground that is not suitable for equipment that carries the risk of tipping.
How high will a scissor lift go?
Depending on the model, expect a scissor lift to extend from ten to sixty feet. However, most scissor lifts have working heights that range from 20 to 40 feet. Scissor lifts tend to have less vertical elevation than other types of aerial lifts.
Are you allowed to raise a person in the air who is standing on the forklift tines?
The only way a person can be raised in the air using a forklift is in an approved cage, with a harness attached. If a safety officer ever gives permission to do otherwise, then they should be sacked.
When traveling load load should I lift?
allow 2 to 3 inches of clearance at the sides and back of the load; move the load slowly into position; tilt the load forward, then lower it; level the forks so they are no longer tilted; and.
Is fall protection required in a forklift man basket?
Passive fall protection systems, such as an approved forklift cage or basket, provide a degree of fall protection for workers at height. However, they do limit access and mobility, and do not prevent falls over the basket’s railings.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Why you shouldn’t wear a harness in a scissor lift?
For instance, if a scissor lift operator is wearing a harness and goes over a lift’s guardrail, he or she could inadvertently create enough force to cause the machine to tip over. In this scenario, the operator could put himself or herself and bystanders in danger.
Can you use a ladder on a scissor lift?
Buckets, step stools, or ladders should never be used in a scissor lift as a way to gain extra height to reach work surfaces. … According to the Occupational Safety and Health Administration (OSHA), this usually rules out moving the lift in an elevated position.
Can you move scissor lift while elevated?
Some safe work practices to ensure safe, stable conditions for scissor lift use include: Follow the manufacturer’s instructions for safe movement—this usually rules out moving the lift in an elevated position. … Use the scissor lift outside only when weather conditions are good.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
What kind of jobs use scissor lifts?
Within the construction industry, scissor lifts are favoured by electricians, steel erectors and plasterers due to their ability to carry tools, supplies and a workman all at the same time.