Buckets, step stools, or ladders should never be used in a scissor lift as a way to gain extra height to reach work surfaces. … According to the Occupational Safety and Health Administration (OSHA), this usually rules out moving the lift in an elevated position.
Can you stand on the rails of a scissor lift?
Check to see that a guardrail system is in place before working on the scissor lift. Only stand on the work platform; never stand on the guardrails. Keep work within easy reach to avoid leaning away from the scissor lift.
Do you need to be tied off in a scissor lift?
Workers on scissor lifts must either be tied-off or protected by guardrails. The Aerial Lift standard (§1926.453) applies to equipment covered in ANSI A92. 2 (1969). Scissor lifts are not addressed in that ANSI standard; consequently, they are not covered by the Aerial Lift standard.
Is it safe to wear a harness on a scissor lift?
While OSHA does not require scissor lift workers to wear a harness or other PFRS, that doesn’t mean you shouldn’t. … That’s one reason OSHA requires scissor lifts to have guardrail systems. A guardrail is one of the most important types of scissor lift fall protection.
Can a scissor lift tip over?
Have you ever wondered, “Can a scissor lift fall over?” The answer is yes. In fact, a man lift tip-over is one of the most common aerial lift accidents.
What is the OSHA standard for scissor lifts?
While there are no OSHA provisions that specifically address scissor lifts, they do meet the definition of a scaffold (§1926.451 – general requirements for scaffolds). Employers must therefore comply with the other applicable provisions of Subpart L when using scissor lifts.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
At what height do you need a harness?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What is the correct stopping distance when traveling on a scissor lift?
A: The length of time required to stop a forklift traveling at full speed varies based on the lift, its load, and other factors. Generally, forklift operators should maintain a distance of at least 20 ft.
Is a scissor lift considered a scaffold?
Per OSHA, a scissor lift is a mobile scaffold for which the platform only moves vertically.
Does OSHA require a harness in a boom lift?
According to OSHA standard, employees must wear “a personal fall arrest or travel restraint system” when working from a boom lift. … Keep in mind, the type of fall protection that OSHA requires is not a personal fall arrest system. It’s a personal restraint system.
Does Cal OSHA require harness on scissor lift?
Cal/OSHA reminds employers that there are two exceptions under which personal fall protection is required. tight space, then Section 3642 (a) applies and requires workers on the scissor lift to use personal fall protection equipment until the guardrails are restored.
Do I need to wear a harness in a cherry picker?
The person operating the cherry picker should wear a fall arrest system, usually consisting of; a full-body harness, a lanyard and a suitable anchor point on the cherry picker’s basket.
How dangerous are scissor lifts?
One of the most common risks that accompany owning a scissor lift is the risk of overturning. When aerial work platforms are used correctly, they are not dangerous. Often times they are set up on uneven ground that is not suitable for equipment that carries the risk of tipping.
What can you not do with a scissor lift?
Scissor Lift Safety Hazards to Avoid
- Open gates Is a Scissor Lift Safety Don’t. …
- Ladders or Step Stools in the Basket Is a Scissor Lift Safety Don’t. …
- Climbing onto or Leaning too Far over Guard Rails Is a Scissor Lift Safety Don’t. …
- Making Bodily Contact with Electrical Conductors or Entering the Induction Field.
How high will a scissor lift go?
Depending on the model, expect a scissor lift to extend from ten to sixty feet. However, most scissor lifts have working heights that range from 20 to 40 feet. Scissor lifts tend to have less vertical elevation than other types of aerial lifts.