How does a scissor lift work?
In the simplest terms, hydraulic scissor lifts operate by pushing liquid from one area to another. … That causes the scissor legs to be pushed apart, which in turn raises the platform. The level of fluid can be maintained by a check valve, which allows the operator to maintain the platform at a constant height.
How do you turn on a scissor lift?
How To Operate A Scissor Lift
- Pull out the emergency stop button on the control panel.
- Select “platform” with off/platform/base select key switch.
- Enter the platform.
- Pull out the emergency stop button on the platform control panel.
Do you have to be tied off in a scissor lift?
Workers on scissor lifts must either be tied-off or protected by guardrails. The Aerial Lift standard (§1926.453) applies to equipment covered in ANSI A92. 2 (1969). Scissor lifts are not addressed in that ANSI standard; consequently, they are not covered by the Aerial Lift standard.
Durante RentalsПодписатьсяHow To Operate A Genie Scissor Lift
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
How much does a scissor lift Cost?
Scissor lifts usually cost between $10,000 and $15,000. Larger models sell for as much as $50,000. A standard 30- to 40-foot boom lift costs between $25,000 to $75,000.
Can you operate a scissor lift from the ground?
Use ground guides when operating or moving the scissor lift around the workplace. Select work locations that do not approach electrical power sources (e.g., power lines, transformers) by at least 10 feet and that do not pose other overhead hazards (e.g., other utilities, branches, overhangs, etc.).
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
How high will a scissor lift go?
Depending on the model, expect a scissor lift to extend from ten to sixty feet. However, most scissor lifts have working heights that range from 20 to 40 feet. Scissor lifts tend to have less vertical elevation than other types of aerial lifts.
How do you extend a platform on a scissor lift?
- To extend/retract powered extension platform, ensure ” ” emergency stop button is pulled. …
- For platform control console with toggle switch: Select lift/off/drive switch to ” For platform control console with rotary switch: …
- On powered extension control console, press and. hold ” ” enable switch, then push extend/retract.