Frequent question: What is the distance that I keep away from a forklift?

The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts. The three-second rule is the same for automobiles on the road and is just as important for forklifts.

What distance is the exclusion zone around a forklift?

Designate exclusion zones for pedestrians and forklifts. Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.

How many feet does it take for a forklift to stop?

A forklift truck at 10 mph = 40 feet to stop. A forklift truck at 10 mph = 40 feet to stop.

THIS IS INTERESTING:  Best answer: How long do electric forklifts last?

What is the minimum distance you should keep when following another lift truck?

What is the safe distance between forklifts that are traveling in the same direction? According to OSHA 1910.178(n)(1), A safe distance shall be kept about three truck lengths. That length is about 20 feet away from each other and that the traffic rule shall be followed including the workplace’s speed limit.

Which safety precaution applies to forklifts?

Forklift operators should be dressed with the appropriate safety equipment, including safety shoes, hard-hats, and a high-visibility jacket. Make sure to tuck away loose clothing to prevent it from getting caught on the forklift.

How often is forklift refresher training and evaluation needed?

OSHA does require that every forklift operator be trained and certified to operate the powered industrial truck in the workplace, and that the operator’s performance be evaluated on the provisions of 1910.178(l)(3) every three years.

Is it OK to allow a coworker to hitch a ride on your forklift If you?

It is never OK to allow a pedestrian or even a co-worker to hitch a ride on the forklift. This equipment is to be occupied only by the forklift operator himself. No other person is allowed to ride on the forks, on the sides and even on the back of the equipment. This is a serious safety violation.

What is the maximum safe speed for a forklift?

The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.

How long does it take a forklift to stop at full speed?

It will take another 10 feet for the forklift to come to a full-stop. If the forklift is going 8 mph, the distance jumps to 42 feet. At a speed of 9 mph the distance jumps up to 51 or more feet.

THIS IS INTERESTING:  Is it mandatory to wear a seatbelt on a forklift?

What’s the fastest forklift?

The Fastest Forklift Speed Ever Recorded Was 74.5 MPH – ForkliftAccessories.com Blog.

Who has the right of way in most warehouses?

OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.

What will make the load more stable during travel?

When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.

When you leave your forklift you need to shut the engine off if?

If the operator goes 25 feet or more away from the truck, or is out of sight of the truck, the engine must be shut off, and the operator must have the key in his or her possession. Visibility: The operator must always have a clear view of the path in the direction of travel.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.

20.04.2011

What are the types of forklifts?

10 Common Forklift Types, Classifications and Uses

  • Warehouse Forklift.
  • Side Loader.
  • Counterbalance Forklift.
  • Telehandler.
  • Industrial Forklift.
  • Rough Terrain Forklift.
  • Pallet Jack.
  • Walkie Stacker.

10.09.2018

THIS IS INTERESTING:  How long does a scissor lift Licence last?

What is the most common type of forklift?

Counterbalance Lift

The Counterbalance is the most common type of forklift. This type of lift has its forks at the front of the machine and is designed with a weight in the back to offset or counter the balance of the load on the front.

Special equipment and operation