How do you control a forklift?

Most forklifts have two levers to control the forks. The first lever controls the height of the forks. You pull back on the lever to make the forks go up, and you push forward to make the forks go down.

How do you operate a forklift?

Look in the direction of, and keep a clear view of, the path of travel. Always operate the forklift at a speed that will allow you to stop it in a safe manner. Slow down when driving on wet or slippery floors. If the load you’re carrying obstructs your forward view, travel with the load trailing instead.

What are the 3 levers on a forklift?

A forklift’s directional controls help move the lift forward and backward. There are three forklift directional controls: park, drive, and reverse. Directional controls can be mounted to a lift’s steering column. Or, they may be placed in a position where an operator controls them with their foot.

What are the 3 pedals on a forklift for?

To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

THIS IS INTERESTING:  Question: Why do tower cranes not fall over?

How do I control my forklift speed?

Place them in crosswalks, pathways, blind spots and areas with pedestrian traffic. Install speed limiting devices on your forklifts. These prevent operators from speeding by controlling the truck’s throttle system. They do not reduce the full lifting power of the truck.

Can you fail a forklift test?

If You Fail One or Both of the Forklift Certification Tests, You Can Retake It. Yes, definitely! You can retry taking or repeat the test you failed. The training school or instructor may ask you to pay again, this is because the time and paper materials they have to spend for your retake.

What are the 7 classes of forklifts?

The 7 Classes of Forklift Trucks

  • Class 1: Electric Motor Rider Trucks.
  • Class 2: Electric Motor Narrow Aisle Trucks.
  • Class 3: Electric Motor Hand or Hand-Rider Trucks.
  • Class 4: Internal Combustion Engine Trucks—Cushion Tires.
  • Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.

What do the 4 levers on a forklift do?

One that lifts the forks up or down, the second one tilts the forks/blades down or up to secure the load, and the third to move the load side to side. Some types of forklifts have a knob that controls the width of the fork.

What is the most common cause of a forklift accident?

The main reason for Forklift accidents is the lack of proper Forklift Training and lack of Forklift Certification given by the Company. There are still many companies allowing Forklift Operators drive the equipment without a Forklift License or a proper Forklift Training.

THIS IS INTERESTING:  Can you pull a horse trailer with a lifted truck?

Where is the counterweight located on a forklift?

Internal combustion forklift counterweights are located toward the back of the forklift, or on the opposite side of the forks.

Why do forklifts have 2 brakes?

To begin with, every forklift comes equipped with an accelerator and a brake pedal. … That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

What is a safe speed for a forklift?

The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.

What is a inching control on a forklift?

The purpose of the inching pedal is to disengage the transmission without having to shift the gear lever into neutral every time a lift is performed. This pedal allows you to bring the forklift to a stop or to slow it down. … This pedal allows you to adjust the rotational speed of the engine.

How long does it take to stop a forklift at full speed?

It will take another 10 feet for the forklift to come to a full-stop. If the forklift is going 8 mph, the distance jumps to 42 feet. At a speed of 9 mph the distance jumps up to 51 or more feet.

What’s the fastest forklift?

The Fastest Forklift Speed Ever Recorded Was 74.5 MPH – ForkliftAccessories.com Blog.

What should you do if forklift tips over?

If the forklift is tipping over, protect yourself by staying put:

  1. Stay in your seat and do not attempt to jump off.
  2. Lean away from the falling direction of the lift.
  3. Hold onto the steering wheel and make sure you’re stable.
THIS IS INTERESTING:  When would you use a hoist?
Special equipment and operation