How do you unload a scissor lift?

How do you transport a scissor lift?

Transportation methods, as with all MEWPs, are weight dependant. The smaller, lighter scissor lifts can be transported in box trailers, however, the bigger, heavier scissor lifts will need to be transported on a suitable plant trailer.

How do you put a scissor lift on a trailer?

Loading your Scissor Lift onto a Trailer

  1. 1 – Designate responsibility. …
  2. 2 – Clean your ramps. …
  3. 3 – Clear the area. …
  4. 4 – Line em’ up. …
  5. 5 – Load your scissor lift onto the trailer. …
  6. 6 – Chain/tie down your heavy equipment.

Durante RentalsПодписатьсяHow To Operate A Genie Scissor Lift

Do you have to be tied off in a scissor lift?

Workers on scissor lifts must either be tied-off or protected by guardrails. The Aerial Lift standard (§1926.453) applies to equipment covered in ANSI A92. 2 (1969). Scissor lifts are not addressed in that ANSI standard; consequently, they are not covered by the Aerial Lift standard.

How do you transport a genie lift?

Inspect the entire machine for loose or unsecured items. Make sure the jib and platform are in the stowed position. Secure the platform with a nylon strap placed parallel to the strap guides. Do not use excessive downward force when securing the boom section.

THIS IS INTERESTING:  How high does a forklift go?

What kind of trailer do I need for a scissor lift?

Flatbed Trailers

These models are ideal for carrying equipment with low ground clearance or poor traction, such as scissor lifts, industrial sweepers, landscaping equipment, pavers, rollers, compactors and more.

What is a scissor lift on a dump trailer?

For many dump trailers in the market today, manufacturers add a scissor hoist. This has folding supports that move up/down in an open-close motion (or criss-cross X pattern) similar to conventional scissors hence the name scissor lift.

How does a scissor lift pontoon trailer work?

Scissor-type trailers can launch in much more shallow waters because they hold the boat from the deck rather than the pontoons. The base can be raised and lowered mechanically, allowing you to lower your boat directly onto the ground then push it into water of any depth.

Can you operate a scissor lift from the ground?

Use ground guides when operating or moving the scissor lift around the workplace. Select work locations that do not approach electrical power sources (e.g., power lines, transformers) by at least 10 feet and that do not pose other overhead hazards (e.g., other utilities, branches, overhangs, etc.).

Do scissor lifts have ground controls?

This switch guards against unintentional initiation of a function. … Ground Control Panel – The panel, on the turntable of a boom lift or the drive chassis of a scissor lift that allows the lift functions to be operated from the ground. There are no drive or steer controls on the ground control panel.

Why you shouldn’t wear a harness in a scissor lift?

For instance, if a scissor lift operator is wearing a harness and goes over a lift’s guardrail, he or she could inadvertently create enough force to cause the machine to tip over. In this scenario, the operator could put himself or herself and bystanders in danger.

THIS IS INTERESTING:  What is hoisting and rigging?

Can you exit a scissor lift at height?

In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.

Can anyone use a scissor lift?

Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.

Special equipment and operation