Most standard forklifts can reach heights between 10 and 15 ft, but special forklifts like the telehandler can lift as high as 55 ft depending on the telehandler size you select.
How high is a 2 stage forklift?
A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs. and up.
How high does a 4 stage forklift go?
A fourth type, the quad mast or 4-stage, offers lift heights up to 22 feet. These are less common and only used in specialized warehouse applications. Single-Stage Mast – Typically used in applications where overhead clearance is not a concern, such as outdoor environments.
What is free lift height?
A forklift’s free lift is the maximum height you can raise the forks without changing the mast height. There are two instances where this typically happens: when the inner mast rails extends past the outer mast rails or when the load backrest or carriage exceeds the height of the outer mast rails.
How high is a 3 stage forklift?
Most Container masted forklifts are also 3 stage masts. They achieve lift heights of up to 4.7 meters in a standard forklift and up to 5.0 meters in a compact and some electric counterbalance units.
What is a 3 stage mast on a forklift?
3-Stage – A three stage mast, or triplex, is the most versatile forklift mast and also the most popular. The outer rails allow for free lift, and the two inner sections can lift loads higher than a two stage. This mast type is a good choice for general warehouse applications.
How heavy is a forklift?
The average automobile weighs approximately 3,000 lbs and the average forklift weighs close to 9,000 lbs.
What is a fulcrum on a forklift?
The Forklift Fulcrum
The fulcrum is the central pivot point of a seesaw. The front axle is the fulcrum of the forklift where the counterweight and the load find balance.
How much can a Toyota forklift lift?
As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs.
When should you drive a forklift backwards?
The driver will slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver will be required to travel in reverse, with the load trailing. 29.
When traveling load load should I lift?
allow 2 to 3 inches of clearance at the sides and back of the load; move the load slowly into position; tilt the load forward, then lower it; level the forks so they are no longer tilted; and.
What does the backrest do on a forklift?
Load backrests play an important role in keeping your drivers safe. They prevent your forklift’s load from falling toward the driver. It features a steel grid above the forks and attaches to the sides of the forklift carriage with heavy-duty, steel framing.
How much clearance does a forklift need?
Calculating 12 inches of clearance will help to ensure you have enough space to accommodate your forklift’s turn radius, so you can turn in the aisle and help protect against potentially unsafe situations resulting from operator error.
What is the stability triangle of a forklift?
Forklift stability is based on keeping the center of gravity inside what’s called the stability triangle. This stability triangle is made by connecting the two front wheels and the pivot point of the rear axle. The other concept to understand is the forklift’s center of gravity.