As a general rule Hyster recommends that your forks extend at least two thirds of the way under the load. However you must consider the characteristics of your load. Your forks would certainly need to extend completely under the load when handling unbanded or loose material.
How long do my forklift forks need to be?
ANSI (American National Standards Institute) states that the forks you are using go at least 2/3rds the length of the load. For instance, a 4 foot long fork can pick up loads up to 6 feet. When doing this the load needs to be evenly distributed on the pallet or the heavier end must be closest to the forklift.
How long are the forks on a telehandler?
Standard in-stock lengths are: 42″, 48″, 54″, 60″, 72″ and 96″ Capacity 4,000 – 5,000 lbs. Pin type fork dimensional tolerances and position are unique for each model and type of truck.
What is the standard width of forklift forks?
Fork Width – Fork width is commonly 4-inches for Class II, 5-inches for Class III, and 6-inches for Class IV. This keeps them within their capacity limits for their classes. Of course, some people will need narrower forks or wider forks depending on the application.
How much are forks for a forklift?
|SIZE||PRICE /PR||CAPACITY PER PAIR @24″LC LBS.|
How heavy is a forklift fork?
Forklift fork, ITA Class 2, 5720 lbs Capacity per pair at 24″ load center, Measures 48″ length by 4″ width by 1-3/4″ thickness.
What grade of steel are forklift forks?
Forklift tines are usually made from 4340, a very tough steel.
What is a Class 2 forklift?
Class II forklifts are electric, narrow aisle models. As the name suggests, Class II forklifts are designed with maneuverability that allows them to operate in tight spaces and narrow aisles.
What are the forks on a forklift made of?
Forklift forks are made from very tough steel, usually 4140 or 4340. These types of steel are used due to their toughness and they maintain a high tensile strength during forging.
When parking or leaving the forklift you must remove the ignition key?
Turn off the engine and the key should be removed
Aside from turning off the engine, and you know you will be away for a longer period, removing the key from the ignition and handing it over to your shift supervisor in case someone wants it to be used during that period is good practice as well.
Are forklift forks interchangeable?
Forks must meet industry standards that make them interchangeable, regardless of the lift truck manufacturer; however, they are specific to the capacity of the forklift.
Are all forklift forks the same?
People who don’t work with forklifts all the time often assume that there is only one type of forks that fit onto lift trucks. There are actually many different types of forks, most of which are interchangeable depending on how you plan to use your forklift. Forklifts can different types of forks.
What is the width of a forklift?
Forklift Dimensions and Lift Height
Even though the size of your forklift can vary, the dimensions for most four-wheel IC and Cushion forklifts range from a width of three feet for the smaller models, and up to eight feet for larger forklifts.
How tall is a forklift?
Another measurement to consider is height. Most standard forklifts can reach heights between 10 and 15 ft, but special forklifts like the telehandler can lift as high as 55 ft depending on the telehandler size you select.
How are fork classes determined?
How are forklift carriage classes determined? If you want to find your forklift’s carriage class, simply measure the distance between the top and bottom carriage bars. Put another way, the distance between the top edge of the upper fork bar and the bottom edge of the lower fork bar = the carriage height.