There are numerous types of “lifts” used in industry, and it can be confusing for employers. Per OSHA, a scissor lift is a mobile scaffold for which the platform only moves vertically. An aerial lift is any vehicle-mounted work platform that can move vertically and/or horizontally.
Is a scissor lift a Ewp?
Scissor/Vertical Lifts and Truck/Trailer mounted EWP’s
To confuse matters, Scissor Lifts are not defined as a boom type EWP (ie does not have the capacity to slew).
What are elevated platforms?
Definitions. The following definitions apply: Elevating work platform. means a work platform that can be self-elevated to overhead work locations and includes all types of aerial devices.
Do you need working at heights for scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Are scissor lifts considered powered industrial trucks?
According to the Occupational Safety and Health Administration, a powered industrial truck is: Any mobile power-propelled truck that is used to pull, push, carry, lift, stack or tier materials is a powered industrial truck.
Do you need a spotter when using a scissor lift?
Until standardisation of control mechanism is achieved, Scissor Lifts are not to be operated unless there is a person on the ground operating as a Spotter. The spotter must be available at all times to activate the emergency lowering mechanism should that be necessary.
Is a harness required when using a scissor lift?
While OSHA does not require scissor lift workers to wear a harness or other PFRS, that doesn’t mean you shouldn’t. After all, there are many hazards associated with scissor lift use. That’s one reason OSHA requires scissor lifts to have guardrail systems.
What are the two basic types of self propelled elevating work platforms?
There are two basic types of elevating work platforms- boom and scissor.
What are the disadvantages of using powered access platforms?
Common hazards include the machine tipping or overturning, overriding safety features, working near power lines, overloading the platform, contact by passing equipment or traffic, contact from swinging booms or pinched by scissor mechanisms, poor maintenance, unauthorized modifications, or unauthorized access on the …
What is the most common risk of working in an elevated platform?
OSHA states that the top hazards associated with aerial lifts are electrocutions, falls from elevations, tip-overs, collapses, being struck by falling objects, and ejections from the aerial lift platform.
At what height do I need to wear a harness?
Explained. Currently, OSHA requires that employers provide fall protection for construction workers on a walking or working surface with an unprotected edge that is 6 feet or more above a lower level.
What height is classed as working at height?
General work at height
Work at height means work in any place where, if precautions were not taken, a person could fall a distance liable to cause personal injury. You are working at height if you: work above ground/floor level. could fall from an edge, through an opening or fragile surface or.
Can I use a scissor lift in my house?
Scissor lifts are a vertical lift with a platform that’s the same size as the base. They’re used in both indoor and outdoor projects, and are popular because they easily lift both personnel and equipment. Smaller scissor lifts are often used indoors, in parking garages and in urban areas.
At what depth of a trench does OSHA require fall protection?
OSHA’s fall protection standard, 29 CFR 1926.500 – Subpart M, states that all employees exposed to falls of 6 feet or more shall be provided with fall protection, and that’s where the conversation usually stops.
What does EE stand for in OSHA?
EE – Employee. EEO – Equal Employment Opportunity.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.