Question: How do I find out what year my Yale forklift is?

OSHA states: “Do not operate a truck with an illegible or missing nameplate.” Since 1995, the last character (letter) of a Hyster or Yale forklift serial number designates the year of manufacture. The letters “I,” “O,” and “Q” are not used since they are easily misread.

What year is my Yale forklift?

To figure out the year your Yale forklift was manufactured, you’ll need to read the serial number and look for a letter in the last position. In the example image the serial number is B875B04662D. The last letter in the serial number is D so using the legend below, the year of manufacture is 2006.

How do I find out what year my forklift is?

To figure out the year your Toyota forklift was manufactured, you’ll need to read the serial number and look for a letter in the last position.

The Hyster lettering system uses the last letter to calculate the year and is as follows:

  1. A = 1957.
  2. B = 1958.
  3. C = 1959.
  4. D = 1960.
  5. X = 1977.
  6. Y = 1978.
  7. Z = 1979.
  8. A = 1980.
THIS IS INTERESTING:  What are the different types of lift kits for trucks?

14.11.2018

Where is the serial number on a Yale forklift?

In many cases, a Yale forklift’s serial number can be found in its electronic system or physically stamped somewhere on its frame.

Where is the serial number on a forklift?

What to do if forklift nameplate is worn, damaged or unreadable. If the nameplate is worn, damaged or unreadable, then all is not lost. In many cases a forklift’s serial number can be located in the electronics system. It can also be found on its frame as a numerical metal stamp.

How much does a Yale forklift cost?

How Much Do Yale Forklifts Cost? The price of a Yale forklift varies widely based upon the model and size. A standard 5,000-pound capacity forklift will run you about $20,000 to $25,000. Keep in mind that electric models are more expensive than comparable gas models.

How do I identify my Clark forklift?

The CLARK serial number is stamped into the serial number plate, which is usually located in the operator’s compartment on the hood or the instrument panel. If the serial number plate is missing or illegible, you can find the serial number stamped into the frame.

Does a forklift have a VIN number?

Serial numbers are critical for ordering the correct parts for forklifts. But what if your forklift’s nameplate has fallen off or worn down? … In many cases, a Toyota forklift’s serial number can be found physically stamped somewhere on its frame.

How do you read a Clark forklift serial number?

A Clark forklift’s serial number can be found physically stamped right on its frame. Often, this number is stamped in the left-hand frame member of the chassis. For example, to the right is the frame stamp from the forklift shown above.

THIS IS INTERESTING:  How heavy is a forklift?

How do you read a Komatsu Forklift serial number?

Most common place for nameplate on Komatsu forklift is next to the steering wheel, on the right side or next to the driver’s seat, on the right. Komatsu forklift’s serial number can sometimes also be found stamped on its chassis. If you are missing data plate or you cant read from it, try searching on the chassis.

What engine is in a Yale forklift?

Yale offers the GM 2.4 as well in models like GLC050VX or GLP50VX though most Yale dealers have a preference: the Mazda FE forklift engine. Yale has used Mazda forklift engines for years and most Yale service personnel will tell you they think it’s a tough, durable engine.

How do you read a Toyota forklift serial number?

The model series is followed by a series of letters, the first of which designates the category of the industrial vehicle. A “B” after the model series designator indicates the forklift has baselegs, which is commonly seen in model numbers for reach trucks and walkie stackers.

How old is my crown forklift?

In some cases, a Crown forklift’s serial number can also be found physically stamped somewhere on its frame. Below is a collection of images that show you where you can find your forklift’s serial number, either by way of its nameplate or its frame stamp.

What class is a walkie forklift?

Class III equipment includes electric pallet jacks, stackers, and tow tractors. This class of equipment comes in both rider and walk behind (“walkie”) models, perfect for unloading deliveries and moving loads to a staging area where they can be handled by other types of forklifts.

THIS IS INTERESTING:  Can you drive a forklift on gravel?

Where is the serial number on a Mitsubishi forklift?

on side of frameortop of main frame next to engine compartment; MITSUBISHI.

What engine is in a Hyster forklift?

The Hyster H50CT lift truck comes standard with a 2.4L engine for power and efficiency, and 4-wheel pneumatic tires for added balance and smooth driving; it has a load capacity of 5,000 pounds. This forklift model is popular because its lighter weight and efficient engine equal lower fuel costs for the business owner.

Special equipment and operation