Quick Answer: How much space do you need for a forklift?

If you have a wide aisle forklift (a sit-down counterbalanced truck), generally your aisles should be 12-13 feet wide for standard 48 inch pallets. If you have narrow aisle trucks, the aisles should be 8-10 feet wide, and for very narrow aisle trucks they can be 6 feet or less.

How much clearance does a forklift need?

Calculating 12 inches of clearance will help to ensure you have enough space to accommodate your forklift’s turn radius, so you can turn in the aisle and help protect against potentially unsafe situations resulting from operator error.

How much space do you need between forklift racks?

Pallet rack spacing requirements for forklifts vary based on the size of the forklift you use to service the racks. On average a large sit-down forklift requires a 12′ aisle between rack rows. A small size sit-down lift requires est. 10′ of aisle space.

How much clearance do you need for a pallet jack?

Current standards call for a minimum pallet racking clearance equal to: 5% of the racking height with the building in the down-aisle direction. 2% of the racking height with the building in the cross-aisle direction.

THIS IS INTERESTING:  How do hydraulic scissor lifts work?

Which is the most common aisle width?

More videos on YouTube

  • A typical aisle is at least 10.5 feet wide.
  • Narrow aisles range from 8.5 to 10.5 feet wide.
  • Very narrow aisles may be only 5 – 7 feet.


What is the minimum clearance between pallets and a racking structure?

Set and enforce adequate handling clearances between pallet loads and the racking frame around them. SEMA specifies a minimum clearance of 75mm between the top of the load and the beam above and on each side. These are absolute minima and the more clearance you can allow, the safer your operation.

How many feet does a forklift turn?

Swing-mast or turret lifts need between four feet six inches and five feet six inches of aisle width. Narrow aisle order picker: These mini-forklifts work well in very narrow warehouse aisles.

What is the width of a forklift?

Forklift Dimensions and Lift Height

Even though the size of your forklift can vary, the dimensions for most four-wheel IC and Cushion forklifts range from a width of three feet for the smaller models, and up to eight feet for larger forklifts.

What is a pantograph on a forklift?

The pantograph forklift is designed with scissor reach mechanism that allows the operators to lift, reach and place various loads with less effort. These forklifts are highly beneficial for operations where thin forks are needed for handling pallets efficiently. …

What is forklift turning radius?

-Smaller turning circles: Can work in aisle widths between 3m and 3.4m, with a turning radius of 1.4m to 1.8m, allowing it to work in tight spaces. This means that in a warehouse more racking can be put in, space can be more efficiently utilised allowing for increased storage space and therefore increased efficiencies.

THIS IS INTERESTING:  Why is Flag Hoisting?

What is a standard pallet size?

When we talk about the standard pallet size in North America, we’re generally talking about the 48” x 40” wooden pallet. The 48 x 40 wooden pallet was established as the standard sized pallet by the Grocery Manufacturers Association (GMA), but it took some time to get there.

How much does a pallet jack cost?

Compare with similar items

This item PALLET JACK 27×48. CAPACITY – 5,500 Lbs. HAND PALLET TRUCK STANDARD MANUAL Standard Duty Pallet Jack Truck 5500 Lb. Capacity, 27 x 48 Forks
Customer Rating 3.8 out of 5 stars (7) 4.3 out of 5 stars (17)
Price From $299.00 $50161
Sold By Available from these sellers IndustrialSupplies

How much space does a pallet take up?

While the standard U.S. pallet size is 48″ x 40″, we know that not all pallets are alike. The standard U.S. pallet typically takes up 13.333 square feet.

How wide should store aisles be?

Aisles. Failing to provide wide enough walkways between shelving units can put a retailer in danger of noncompliance with the ADA. A minimum width of 36 inches is required. If the aisle is more than 200 feet long, a passing space of at least 60 inches by 60 inches must be provided.

How do I determine the width of my aisle truck?

A good rule of thumb for determining the aisle requirement for a wide-aisle forklift is to measure the distance from the load backrest to the counterweight (a.k.a the headlength) . Then measure the length of the load. This might be a 48″ long pallet. Add to their sum an additional 12″ for mneuverability.

THIS IS INTERESTING:  How often should hoists be cleaned?

What is the minimum aisle width?

The recommended width of aisle markings varies from 2 inches to 6 inches; therefore, any width 2 inches or more is considered acceptable. The recommended width of aisles is at least 3 feet wider than the largest equipment to be utilized, or a minimum of 4 feet.

Special equipment and operation