What are the safety rules for parking the lift truck?

Which step should you do every time you park a forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

When parking or leaving your truck you should?

When parking or leaving your truck, you should: – Park or leave your truck in a safe area away from traffic. – Lower the forks until they are flat on the floor.

When parking a lift truck How should the fork arms be positioned?

When parking a lift truck the heels of the forks should be as low as possible and the tips touching the ground.

THIS IS INTERESTING:  How do you drive a forklift?

Which of the following are forklift rules of the road?

Keep your arms, legs, head and feet inside the forklift when driving. Never drive with the forks up, or use the forklift to push other vehicles. Never pass a forklift going in the same direction, especially at blind spots, intersections or other dangerous areas.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.

20.04.2011

What 4 checks must you make to a load before picking it up?

When using a forklift, workers should begin by performing basic safety checks on the components of the forklift, including the fluids, tyres, controls, warning devices, seating, brakes and mast forks.

What are the 7 classes of forklifts?

The 7 Classes of Forklift Trucks

  • Class 1: Electric Motor Rider Trucks.
  • Class 2: Electric Motor Narrow Aisle Trucks.
  • Class 3: Electric Motor Hand or Hand-Rider Trucks.
  • Class 4: Internal Combustion Engine Trucks—Cushion Tires.
  • Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.

What is the most important safety device on a lift truck?

Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. If the brakes malfunction, accidents are unavoidable. At the beginning of each shift, operators are required by law to complete a full safety inspection.

What formula determines the load’s moment?

A load moment is when a load center’s distance from a fulcrum increase. This determines how much overturning force is being applied to the forklift, and is a product of load weight times distance from the fulcrum (i.e., load moment = weight x distance).

THIS IS INTERESTING:  Question: How stable is a scissor lift?

What should an operator do immediately after they find a problem with a lift truck?

Report any problems identified in daily check to the supervisor immediately. Check with your jurisdiction for any requirements regarding frequency of checks, and maintenance.

Is it illegal to leave keys in a forklift?

You might not be aware but it is actually illegal to leave the keys in an unattended Forklift. This measure is to prevent unauthorised use of the Forklift. … All forklifts and plant equipment can be fitted with low cost Driver Identification systems which prevent unauthorised usage.

How far should you stand from a forklift?

The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts. The three-second rule is the same for automobiles on the road and is just as important for forklifts.

What is the most common type of forklift?

Counterbalance Lift

The Counterbalance is the most common type of forklift. This type of lift has its forks at the front of the machine and is designed with a weight in the back to offset or counter the balance of the load on the front.

What is OSHA highest inspection priority?

OSHA’s top priority for inspection is an imminent danger-a situation where workers face an immediate risk of death or serious physical harm. Second priority goes to any fatality or catastrophe-an accident that requires hospitalization of three or more workers.

What is a Class 5 forklift?

Class V forklifts are internal combustion engine pneumatic tire trucks. Forklifts in this class are similar to those in Class IV, but are designed primarily for outdoor use. These forklifts are highly durable and are ideal for lumberyards, construction sites, and other outdoor applications.

THIS IS INTERESTING:  What is a 5K forklift?
Special equipment and operation