– If a MEWP moves vertically but within the tipping lines, such as a scissor lift, it is classified as Group A. – If the MEWP can move beyond the tipping lines (outriggers or wheels) it is considered Group B. A boom lift is an example of equipment in Group B.
What does IPAF 3a and 3b cover?
The IPAF 3a Operator category covers the safe use of Mobile Vertical machines generally called Scissor Lifts. The IPAF 3b Operator category covers the safe use of Mobile Boom machines which are self-propelled booms and may be articulated or telescopic booms.
Is a scissors lift an aerial lift?
Scissor lifts are not aerial lifts, are considered scaffolds. Occupational Safety and Health Administration.
What is a Type 2 Mewp?
Type 2 MEWP: MEWP for which travelling with the work platform in the elevated travel position is controlled from a point on the chassis. … Type 2 MEWP: MEWP for which travelling with the work platform in the elevated travel position is controlled from a point on the chassis.
Do you need IPAF for scissor lift?
A PAL Card, IPAF Card, IPAF Licence or certificate is what you need to prove you have the right training and experience to use powered access equipment (eg. Cherry pickers or Scissor Lifts).
Do you need to wear a harness in a scissor lift?
If you’re using a vertical or scissor lift, however, it’s not always necessary to use fall protection equipment – like a harness – unless called for by exceptional circumstances.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Can you use a ladder on a scissor lift?
Buckets, step stools, or ladders should never be used in a scissor lift as a way to gain extra height to reach work surfaces. … According to the Occupational Safety and Health Administration (OSHA), this usually rules out moving the lift in an elevated position.
How often do you need scissor lift training?
OSHA requires all lift workers to be recertified every three years.
What is a scissors lift?
A scissor lift is a machine made to move personnel and equipment in a vertical direction. These lifts can handle any application that would normally require a ladder, tower or scaffolding.
What is a 3a lift?
Mobile Vertical (3a, 3a+): Scissor lifts, vertical personnel platforms (mobile) Mobile Boom (3b, 3b+): Self-propelled booms. Push Around Vertical (PAV): Push around verticals.
Do you need a certificate to use a scissor lift?
The Operator’s Manual and a copy of the current 6 monthly Certificate of Thorough Examination for the Scissor Lift is required. Successful delegates will receive a 3a Mobile Vertical IPAF PAL Card valid for 5 years and an IPAF Certificate of Training for the 3a Mobile Vertical.
Do I need training to hire a scissor lift?
Operator instruction and training are very important requirements. MEWP operators should have attended a recognised operator training course (eg IPAF) and received a certificate, card or ‘licence’, listing the categories of MEWP the bearer is trained to operate.
What is needed to operate a scissor lift?
There is no special license or certification for operating or working on a scissor lift. However, OSHA requires that employers provide training to workers before using a scissor lift. … Employers must also include manufacturer’s instructions for operating a scissor lift both vertically and while in transit.