What is the maximum weight a forklift can lift?

Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.

How much can a 5000 lb forklift lift?

A 5,000-lb. capacity forklift will lift that much weight up to 48-inch forks (with a 24-inch load center) but going out to 60 inches (with a 30-inch load center), for example, drops the capacity to 4,000 pounds.

What forklift can lift the most?

Some of the most popular warehouse forklift models include the Hyster 36-38T, Komatsu 20 BX50 Hyster, and the Toyota 3-Wheel Electric Forklift. Most industrial forklifts can lift 5,000 lbs of weight, but some heavy-duty models are capable of elevating up to 25,000 lbs.

THIS IS INTERESTING:  How long is a forklift license valid for in Ontario?

How much can a big forklift lift?

Forklift capacity is the measurement of how much weight a particular forklift can lift. Lower capacities begin around 3,000 lbs. and can go up to over 50,000 lbs.

Can a lift truck with a 6000 lb capacity at a 24?

For example, a forklift rated to carry 6,000 lbs at a 24″ would have a maximum load moment of 144,000 pounds. This equation is useful for determining if an unusual load (e.g., one longer than 48″ or with uneven weight distribution) can handle safely. … Divide 144,000 lbs. by 30″.

How much does a 4000 lb capacity forklift weigh?

Here are some basic forklift weights including common model stats: Typical forklift weight ranges are between 4000 to 9000 lbs or 1800 to 4100 kg. Most forklifts used in a warehouse and distribution center weighs 3500 to 5000 lbs or 1500 kg to 2300 kg.

When traveling with a load the load should be lifted 5 inches?

Lower the load so that its lowest point is 15 to 20 cm (6 to 8 inches) from the floor. While traveling, keep the load at a safe travel height.

How much can a 8000 lb forklift lift?

Max. Lift Height: At Reach Length: Lift Capacity:
35 feet Vertical 2 feet Extended 8,000 lbs.
44 feet Vertical 3 feet Extended 6,000 lbs.
32 feet Vertical 17 feet Extended 4,000 lbs.
27 feet Vertical 22 feet Extended 3,000 lbs.

How much can a 10K forklift lift?

How much can a 10k forklift lift? Utilizing the Cat 928Hz platform, the 10K ATFL is capable of lifting and carrying 10,000 lbs, and is able to reach a height of 96” fully loaded. The open center hydraulic system provides precise load management, with maximum productivity.

THIS IS INTERESTING:  What are the three points of a forklift that make up the stability triangle?

Can forklift be used for lifting?

The OSHA rule for forklifts at construction sites at 29 CFR 1926.602(c)says trucks with lifting carriages or forks for lifting personnel must use a safety platform firmly secured to the lifting carriage or forks. … Rough terrain forklifts shall not be used to lift personnel unless there is no other practical option.

How much can a 4000 forklift lift?

In their given example, OSHA explains that a forklift able to lift 4,000 pounds at a 24-inch load center can only carry 2,666 pounds at a 36-inch load center. Think about it: just a one-foot difference in the center load position and a forklift’s max load is reduced by up to 33%!

How heavy is a forklift?

The average automobile weighs approximately 3,000 lbs and the average forklift weighs close to 9,000 lbs.

How heavy is a forklift fork?

Forklift fork, ITA Class 2, 5720 lbs Capacity per pair at 24″ load center, Measures 48″ length by 4″ width by 1-3/4″ thickness.

When traveling with a load the load should be lifted how far off the ground?

Lift the load and tilt it back a little more before traveling. Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy.

When a lift truck is turning Is it more stable loaded or unloaded?

How should you raise the load? When a load is raised, the lift truck is less stable. … Attend the controls of the forklift truck when a load is elevated. In other words, the operator must stay on the forklift when the load is in a raised position.

THIS IS INTERESTING:  Where is the forward point of balance for a forklift?

What happens to the center of gravity when you lift a heavy load above the forklift?

Heavier loads shift the center of gravity forward even further. Raising the load also shifts the center of gravity forward. In order to prevent the lift from tipping, the combined center of gravity of the load and the lift must stay inside the stability triangle (at ground level) at all times.

Special equipment and operation