What position do you place the forks when parking your forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

What position should the forks be in while driving a forklift?

Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.

How do you park a forklift truck?

Parking Safety Rules

  1. Always try to find a level surface to park on. …
  2. Lower forks, or the forklift attachment, all the way to the ground. …
  3. Put the gear into neutral.
  4. Make sure the wheels are straight. …
  5. Set the parking brake every time you park the forklift. …
  6. Turn off the engine before dismounting the forklift.
THIS IS INTERESTING:  What does high reach forklift mean?

How low should forks be driving forklift?

Travel with forks as low as possible from the floor and tilted back (usually within 10-15 cm (4 to 6 inches) above the floor). Match speed to, load, presence of pedestrians, obstructions, and driving and workplace conditions, including slippery surfaces.

When picking up a load the forks should be tilted?

The forks should be at least two-thirds the length of the load. The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack.

What are the 3 pedals on a forklift for?

To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

What steps should you do every time you park a forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

Is it illegal to leave keys in a forklift?

You might not be aware but it is actually illegal to leave the keys in an unattended Forklift. This measure is to prevent unauthorised use of the Forklift. … All forklifts and plant equipment can be fitted with low cost Driver Identification systems which prevent unauthorised usage.

THIS IS INTERESTING:  How much do crane operators make per hour?

Which side of the forklift is supporting more weight?

Weight distribution refers not only to the weight of the load, but also the weight of the forklift itself. An empty forklift has most of its weight in the rear, but when a load is placed on the lift, the weight distribution moves forward.

What to do if forklift tips over?

If the forklift is tipping over, protect yourself by staying put:

  1. Stay in your seat and do not attempt to jump off.
  2. Lean away from the falling direction of the lift.
  3. Hold onto the steering wheel and make sure you’re stable.

Is it safe to drive a forklift backwards?

“It would be, in my opinion, a very dangerous way to drive a forklift for a long period of time,” Iunker said. Driving in reverse while looking backward would cause the steering wheel to move more than intended, making it very hard to control, he added.

How do you move the forks on a forklift?

Raise the fork slightly. The fork will be resting in a small groove in the crossbar; nudge the fork out of the notch so that it will slide along the top of the crossbar. If the forks are rarely adjusted they may be very hard to move. If so, move to the end of the fork and move it from side to side to break it free.

When driving with an empty forklift forks should be kept 18 to 24 inches off the ground?

When driving a empty forklift,forks should be kept 18 to 24 inches off the ground. The safest way to cross curbs and railroad tracks is at an angle. When working with pallets ,forks should be positioned as widely apart a possible.

THIS IS INTERESTING:  Your question: How do I become a forklift trainer?

How do you know if it is safe to pick a load with the forklift?

It is always recommended to consult a forklift user manual and find out a manufacturer’s recommended maximum load capacity before transporting heavy loads. If those numbers or a safety supervisor are unavailable, you can calculate a safe forklift load capacity, thanks to the OSHA forklift load calculator.

What is the correct position when picking up a load?

Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.

How do you ensure the load is stable?

Make sure the load is evenly balance across both forks. Make sure the heavier part of an unbalance object is towards the cockpit of the vehicle. Stack the load on the pallet or skid safely and correctly. Use securing measures such as ropes or bindings if required.

Special equipment and operation