What steps should you do every time you park a forklift?

What should you do every time you park a forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

How do you park a forklift?

Forklift Parking Procedure

  1. Stop the forklift and apply the handbrake. …
  2. Fully lower the carriage and tynes.
  3. Tilt the mast forward so the tyne tips are touching the ground. …
  4. Turn the key or keyless switch to the ‘off’ position. …
  5. Release the units seatbelt and safely dismount from the operator cabin.

How should the forklift blades be when parked?

To achieve a safe “parked” fork position, an operator lowers the forks completely with the mast vertical. The mast is then tilted slightly forward until the fork tips touch the floor, preventing a pedestrian’s hook fall. Help limit the damage that can occur at your warehouse.

THIS IS INTERESTING:  Best answer: Why do we hoist flag on Independence Day?

Can you leave keys in a forklift?

Never leave an operating forklift unattended.

In fact, leaving keys in an unattended forklift (or, thus, leaving on the ignition of this vehicle) is illegal, and has dire consequences as a safety hazard, even without the actual occurrence of an accident.

What will make the load more stable during travel?

When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.

What 4 checks must you make to a load before picking it up?

When using a forklift, workers should begin by performing basic safety checks on the components of the forklift, including the fluids, tyres, controls, warning devices, seating, brakes and mast forks.

At what distance is a forklift considered to be unattended?

Note: A powered industrial truck is unattended when the operator is 25 feet or more away from the vehicle which remains in his view, or whenever the operator leaves the vehicle and it is not in his/her view.

What to do if forklift tips over?

If the forklift is tipping over, protect yourself by staying put:

  1. Stay in your seat and do not attempt to jump off.
  2. Lean away from the falling direction of the lift.
  3. Hold onto the steering wheel and make sure you’re stable.

What are the 3 pedals on a forklift for?

To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

THIS IS INTERESTING:  What type of steel are forklift forks?

When traveling with empty forklift the forks should be in what position?

When travelling in an empty forklift, the forks of the lift should be in the position of waist high.

When picking up a load the forks should be?

Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back. Use caution when carrying a load on an uneven surface; it creates a tip-over hazard.

Which side of the forklift is supporting more weight?

Weight distribution refers not only to the weight of the load, but also the weight of the forklift itself. An empty forklift has most of its weight in the rear, but when a load is placed on the lift, the weight distribution moves forward.

When moving the forklift in reverse you must?

When should you drive a forklift in reverse?

  1. Always. Travel slowly when moving down slopes.
  2. Speed. Ensure the forks face uphill when traveling up or down slopes with a load because this ensures stability and prevents the load from falling off the fork arms. …
  3. Load. …
  4. No Load. …
  5. Never.

What should you check before lifting a load?

Check out these safe lifting and handling tips, recommended by the Health and Safety Executive.

  1. Think before you lift. …
  2. Keep the load close to the waist. …
  3. Adopt a stable position. …
  4. Ensure a good hold on the load. …
  5. Do not bend your back when lifting. …
  6. Do not bend the back any further while lifting. …
  7. Do not twist when you lift.
THIS IS INTERESTING:  Who makes the best electric forklift?

How can I improve my forklift safety?

Here are the most essential tips for forklift safety.

  1. Get Forklift Certification. …
  2. Wear Proper Clothing. …
  3. Know the Forklift Class. …
  4. Inspect the Equipment Daily. …
  5. Maintain 360° Visibility. …
  6. Implement a Floor Marking System. …
  7. Maintain Equipment Capacity. …
  8. Never Carry Extra People.

18.09.2019

Special equipment and operation