A properly trained operator will carry his forks or load 4-6 inches off the ground. This position is high enough to reduce contact with dock plates, expansion joints in concrete, uneven areas, slight slopes, inclines and debris on operating surfaces.
How should forks be positioned when truck is parked?
Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.
What are the safety rules for parking the lift truck?
Parking Safety Rules
- Always try to find a level surface to park on. …
- Lower forks, or the forklift attachment, all the way to the ground. …
- Put the gear into neutral.
- Make sure the wheels are straight. …
- Set the parking brake every time you park the forklift. …
- Turn off the engine before dismounting the forklift.
How far off the ground should forklift forks be?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy.
When parking or leaving your truck you should?
When parking or leaving your truck, you should: – Park or leave your truck in a safe area away from traffic. – Lower the forks until they are flat on the floor.
Is it illegal to leave keys in a forklift?
You might not be aware but it is actually illegal to leave the keys in an unattended Forklift. This measure is to prevent unauthorised use of the Forklift. … All forklifts and plant equipment can be fitted with low cost Driver Identification systems which prevent unauthorised usage.
How should a lift operator travel with a full pallet on the forks?
If it’s a stable load and secure on the pallet, tilt first, then lift. Once the load is lifted, lower it to a safe traveling height. Keep the forks two to four inches off the floor if driving on a smooth surface.
What are the 7 classes of forklifts?
The 7 Classes of Forklift Trucks
- Class 1: Electric Motor Rider Trucks.
- Class 2: Electric Motor Narrow Aisle Trucks.
- Class 3: Electric Motor Hand or Hand-Rider Trucks.
- Class 4: Internal Combustion Engine Trucks—Cushion Tires.
- Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.
What class lift trucks should not turn on an incline?
PEDESTRIANS AND FORKLIFTS SHOULD NEVER OCCUPY A RAMP OR INCLINE AT THE SAME TIME, IF THE OPERATOR OF A CLASS 1, 4, & 5 IS CARRYING A LOAD THAT BLOCKS THEIR FORWARD VISION ON LEVEL SURFACES, THEY ARE TAUGHT TO DRIVE IN REVERSE. BUT WHEN APPROACHING A RAMP OR INCLINE, THAT LOAD MUST FACE UPHILL.
What 4 checks must you make to a load before picking it up?
When using a forklift, workers should begin by performing basic safety checks on the components of the forklift, including the fluids, tyres, controls, warning devices, seating, brakes and mast forks.
What is the first thing you need to do before raising or lowering a load?
Check that the overhead clearance is adequate before raising loads. Do not raise or lower the fork unless the lift truck is stopped and braked. Lift loads straight up or tilt back slightly. Do not lift a load that extends above the load backrest unless no part of the load can possibly slide back toward the operator.
Is it safe to drive a forklift backwards?
“It would be, in my opinion, a very dangerous way to drive a forklift for a long period of time,” Iunker said. Driving in reverse while looking backward would cause the steering wheel to move more than intended, making it very hard to control, he added.
When traveling with empty forklifts The forks should be in what position?
When travelling in an empty forklift, the forks of the lift should be in the position of waist high.
What is the most important safety device on a lift truck?
Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. If the brakes malfunction, accidents are unavoidable. At the beginning of each shift, operators are required by law to complete a full safety inspection.
How long does it take to stop a lift truck that is traveling at full speed?
It will take another 10 feet for the forklift to come to a full-stop. If the forklift is going 8 mph, the distance jumps to 42 feet. At a speed of 9 mph the distance jumps up to 51 or more feet.
What is the most common lift truck accident?
The most common type of lift truck accident is one of the most fatal: being crushed by a lift truck. The Centers for Disease Control and Prevention (CDC) says that most fatal lift truck accidents happen when a worker is crushed by a forklift overturns or falls from a loading dock.