When should forklift tires be replaced?

Many forklift tires have a wear line, often called the 50% wear line. When the wear of your tires reaches that line, it’s time to replace. Chunking. If pieces, or chunks, of your forklift tires are falling off, that’s a good sign you need to replace them.

When should I replace my forklift solid tires?

Always replace the tire before it gets worn down to the safety line. You should also replace the tires if you notice chunking, tearing or cracking, or if you see flat spots. Damaged tires threaten the safety of the machine and the operator. Replace them as soon as possible.

How long should forklift tires last?

Forklift tires, with normal usage, typically last between 2,000 and 2,400 operating hours.

Can you change tires on a forklift?

As a quick reminder we do not recommend you attempt to change forklift tires yourself. It’s important to be trained and experienced on how to change a forklift tire as well as have the right equipment like a tire press and tire cage. Always call a reputable dealer.

THIS IS INTERESTING:  Your question: Can you operate a crane at night?

How do you check a forklift tire?


  1. Measure the outer diameter, picture the tire as a compass with north at the top of the tire. …
  2. Measure the rim diameter, stay in the center of the tire but only extend the tape measure to each edge of the rim.


Why do you check forklift Tyres before use?

It is important to check your tyres before you get behind the wheel. As poorly inflated or flat tires can affect how well the brakes work and cause an accident. Check your forklift tyres for excessive wear. Ensure there is no damage such as cuts or gouges.

Are forklift tires solid?

Forklift tires are available in three types: Cushion, Solid Pneumatic and Air Pneumatic. Cushion Tires are composed of solid rubber and are directly pressed onto the wheel. … Pneumatic Tires (Air Filled) are designed of rubber, but are air filled much like a car or truck tire.

How heavy is a forklift tire?

Forklift tires size 16x7x10. 5 weigh, on average, 52 pounds per tire. They are used mostly on forklifts but have a broad spectrum of applications they can be utilized in.

What is cushion tire forklift?

Cushion tire forklifts are ideal for both indoor and outdoor on smooth terrain. Cushion tires are made of smooth solid rubber bonded to a metal ring or baseband. They are cheaper to manufacture and easier to maintain, but cushion tires do not get the same level of traction as a pneumatic tire, particularly outdoors.

Can you put pneumatic tires on a forklift?

No – the wheel opening on a cushion tire forklift will not accept a pneumatic tire. Buy a pneumatic or solid pneumatic tire forklift for outdoor applications and buy a cushion/solid tire forklift for indoor/warehouse applications.

THIS IS INTERESTING:  Question: Does a forklift need to be registered NSW?

Which steps should you do every time you park a forklift?

Parking Safety Rules

  • Always try to find a level surface to park on. …
  • Lower forks, or the forklift attachment, all the way to the ground. …
  • Put the gear into neutral.
  • Make sure the wheels are straight. …
  • Set the parking brake every time you park the forklift. …
  • Turn off the engine before dismounting the forklift.

How do you remove a forklift tire?


  1. Jack up the forklift and insert wood blocking under the frame for safety.
  2. Unscrew and remove the wheel.
  3. Unmount the old tire from the wheel.
  4. Attach the wheel to the tire press.
  5. If it is a cushion tire, press the tire onto the wheel.


What is the first thing you need to do before raising or lowering a load?

Check that the overhead clearance is adequate before raising loads. Do not raise or lower the fork unless the lift truck is stopped and braked. Lift loads straight up or tilt back slightly. Do not lift a load that extends above the load backrest unless no part of the load can possibly slide back toward the operator.

Special equipment and operation