Your question: How do I get shocks for a lifted truck?

What kind of shocks do I need for my lifted truck?

Top 10 Best Shocks For Lifted Trucks

  • Rancho RS5000X Shock Absorber.
  • Rancho RS9000XL Shock Absorber.
  • Bilstein B8 5160 Series Shocks.
  • Bilstein B8 5100 Series Shocks.
  • ACDelco 519-2 Specialty Spring Assisted Shock Absorber.
  • Monroe 34690 Gas-Magnum Truck Shock Absorber.
  • KYB 565104 MonoMax Gas Shock.

30.03.2020

Do I need special shocks for a lifted truck?

If your truck has a LIFTED SUSPENSION modification, those usually require a certain length specialty shock. It will depend on the lift-kit manufacturer, and how much lift the kit provides. If you are uncertain how much lift your truck has, or what size shocks you need, you must check with the lift kit manufacturer.

How long do shocks last on lifted truck?

“As a general rule of thumb, OEM hydraulic twin-tube shocks only last about 15,000 to 20,000 miles when used in a work truck environment (towing, hauling heavier loads, off-road/off-pavement use),” says Shane Casad, Bilstein of America, who specializes in pickup suspension setups.

THIS IS INTERESTING:  How are construction cranes taken down?

Do I need longer shocks for a 3 inch lift?

Suspension lift kits that raise your truck higher than 3 inches will usually require a new shock absorber to take up the difference in distance between the top and bottom mounting points of the shock. To simplify the shopping experience, the majority of brands we carry will include new shock absorbers in these cases.

How can I make my lifted truck ride smoother?

To combat these issues, you can invest in reservoir shocks to help smooth out your ride. You can also consider buying coilover shocks, custom leaf springs, and traction bars for even more dampening relief. Keep an eye on your driveline after you lift your truck.

Do I need longer shocks for a 2 inch lift?

If you are adding 2″ of lift in the rear then yes you would need longer shocks or you will be limiting your downtravel by 2″.

Do 2 inch leveling kits require new shocks?

Do I Need New Shocks? Not all leveling kits require new shocks. … However, if your original shocks have 20,000 or more miles on them, you plan to take the vehicle off-road, or if you drive aggressively, you should consider new shocks mandatory with the installation of a suspension leveling kit.

Can you lift a truck with just shocks?

Standard shocks without specialized gas will not lift a vehicle. The best way to about lifting a truck is using a lift kit, which comes with all the necessary parts to ensure a good job. … Since the suspension connects the tires to the truck, it’s through this that you can raise it.

THIS IS INTERESTING:  How much does it cost to take a lift kit off a truck?

Do shocks give you lift?

shocks in it of themselves do not give lift, they are simply dampers.

Do you need longer shocks with a lift kit?

For an extreme lift like this, you’re likely to need new shocks, longer brake lines, driveshaft spacers, drop Pitman arms, alignment shims and possibly other steering and driveline modifications to retain the proper geometry.

Can you pull fifth wheel with lifted truck?

Towing a fifth wheel with a lifted truck that is designed for off-roading is not an option because its lift kit is most likely not capable of this task. As usually, compromises may lead to negative consequences so towing is one of the activities that require proper equipment to be performed safely.

Should I replace all 4 shocks at the same time?

Finally, replace your struts and shocks in pairs

Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control. After all, all four have been on the vehicle for the same number of miles and worked under the same conditions.

How much does it cost to replace shocks on a truck?

The cost to replace shocks is going to be slightly less than struts since they are generally not as complicated as struts. The average total cost to replace a pair of shocks will run about $250 to $580. An individual shock absorber will cost around $50 to $140 so parts alone will set you back between $100 and $280.

Special equipment and operation