Blue spotlights mounted on the front and/or rear of the lift truck alert pedestrians when a forklift is nearby, and how fast it’s approaching.
Does OSHA require blue lights on forklifts?
The purpose of blue, and sometimes red, LEDs attached to forklifts is to project focused light onto the floor at various distances front/back/side from the forklift to provide a visual warning to pedestrians and nearby workers. This practice is not required, or prohibited, by federal OSHA.
What do the blue lights on pit indicate?
When pointing down at the ground, the blue light can show where the otherwise hard to see crane hook is, is heading, and who should be getting out of its way before it touches down.
What is auxiliary directional lighting?
Auxiliary light means a light, other than standard equipment lighting such as headlights, taillights, directional signals, brake lights, clearance lights, parking lights and license plate lights, that is displayed on a vehicle and used to increase the operator’s visibility of the road or the visibility of the vehicle …
Are forklifts lighter than cars?
Forklifts are much lighter than cars. … You should make eye-to-eye contact with a forklift operator before moving into a truck’s work zone.
Why do forklifts use blue lights?
Blue spotlights mounted on the front and/or rear of the lift truck alert pedestrians when a forklift is nearby, and how fast it’s approaching. … Red zone forklift lights illuminate areas on each side of the forklift pedestrians should avoid.
What lights are required on a forklift?
Unfortunately, there isn’t a simple answer. OSHA’s powered industrial truck standard (§1910.178) only requires two types of forklift lights: Brake/tail lights (if your forklift came equipped with them) Headlights, but only if the light in the work environment is less than 2 lumens per square foot.
What are the blue lights on the side of the road?
The use of blue, or blue and red flashing lights is intended to advise other road users that the vehicle displaying them is responding to an emergency situation. They must only be used when the vehicle is being used for police operational functions or urgent purposes arising from an accident, fire or other emergency.
What are the blue lights on the streets?
The blue raised pavement markers, or RPMs, are installed by local and state agencies to assist first responders in locating fire hydrants. They are not legally required, but are encouraged as a public safety supplement.
What does a yellow flashing light mean?
Any flashing yellow signal means drivers are to slow down and proceed through the intersection with caution. A flashing red signal means motorists should come to a complete stop before proceeding.
What are auxiliary lights for?
Auxiliary lights are designed to improve visibility during night time driving and inclement weather. Auxiliary driving lights are designed to provide relatively long range illumination forward of the vehicle that enhance the visibility of distant objects.
Are fog lights considered auxiliary lights?
In the US, both fog lights, front and rear, are considered auxiliary or supplementary lights and so they are not mandatory.
What is a indicator light?
An indicator lamp serves notice that the vehicle should be checked and diagnosed by a mechanic. An indicator lamp is a warning device used to alert drivers of potential problems with their vehicles. Functions such as oil pressure, water temperature and the voltage are all typically wired into dashboard indicator lamps.
Why are forklifts so dangerous?
There are many factors that explain why forklifts are dangerous: Forklifts are heavy. … The weight of a forklift is unevenly distributed, which makes it harder to operate and drive. The rear wheels of a forklift are responsible for turning the vehicle, increasing the chances of tipping during tight turns.
What formula determines the load’s moment?
A load moment is when a load center’s distance from a fulcrum increase. This determines how much overturning force is being applied to the forklift, and is a product of load weight times distance from the fulcrum (i.e., load moment = weight x distance).
What are the three points of the stability triangle?
The three points are the two front wheels and the pivot point of the rear axle. Connect the three points, and you have what’s called the stability triangle.