There is such a thing as over greasing, bearings only need so much grease, and over greasing is just wasting grease. A lot of that grease is slung off the bottom. Sometimes grease is put in the spindle to keep water out . A lot of spindles do not have grease fittings.
How often should you grease mower spindles?
The spindles and caster wheels are generally the most often greased. The spindles and castor wheels should be done around once a month because of the moving interior parts. Commercial mowers that put hundreds of hours on their Ferris mower would be looking at greasing the mower everyday depending on usage.
How do you know if your lawn mower spindle is bad?
The Four Signs the Spindles are Malfunctioning
- The Lawn Will Have Uneven Cuts. The first and most noticeable problem when the spindles go out is the yard is cut uneven. …
- There Will Be a Squealing Noise. …
- If There is Vibration and Buzzing Noises. …
- Broken or Bent Parts Can Mean the Spindle is Worn.
Do new mower spindles come greased?
They do not come packed from the factory, that is a common misconception. When I worked for a Deere dealer it was not uncommon to have to change all the spindles, idler pulleys, and deck belt at ~150 hours. On a three blade deck it would often take an entire tube of grease to fill the new spindles.
What is the best grease for mower spindles?
In this review, we have rounded up 3 best grease for mower spindles for you so that you can shop with confidence:
- Stens 770-123″00″ Grease. …
- Briggs & Stratton Grease Gun Refill Kit 100058. …
- Deere Original Equipment Grease #TY6341.
Do you need to grease lawn mower spindles?
The spindles on a riding or commercial walk-behind mower are attached to the cutting deck and work with the pulleys to turn the blades below the deck so grass can be cut. The rotating parts of the spindle must be greased periodically to maintain smooth operation, and prevent overheating and potential damage.
How long do mower spindles last?
Member. The maintenance free spindles usually last about 2-3 years in commercial use.
When should I replace my mower spindle?
How to Tell if Mower Deck Spindle is Bad
- Uneven grass after cutting.
- Bent and broken parts.
- Squealing sounds.
- Loud buzzing noise and vibration.
- Spindle failing to heat up.
Do mower spindles get hot?
The friction from the drive belt entering and leaving the pulleys can warm them up pretty quick. More load on the mower blades means more horsepower handled by the belt and pulleys which adds to the heat load, as will the heat from the spindle bearings under load.
Where do you grease a lawn mower?
For lubrication, utilize a lever-action type grease gun for the lawn mower. The spindles that need to be lubricated include the cutting spindles and front axle spindles. The grease fittings are situated on the back of the spindle. The front axle spindles are easy to locate and access.
What are spindles on a lawn mower?
The spindle on a riding mower is the post to which the blade attaches and around which it spins when the machine is in action. A riding mower may have one or more spindles, depending on the size of the mower and the way it is manufactured. You may have a problem with one or more spindles at the same time.
How often should I grease my zero turn mower?
This maintenance is easy to forget but it’s important. You should lubricate the bearings one to two times each mowing season to protect them from wear and keep them spinning smoothly.