Can you use a chainsaw as a trencher?

Yes, you could trench with a chainsaw, for a while at least. Don’t Cut Into Dirt Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud.

Can you use a chainsaw to dig a trench?

Yes, you could trench with a chainsaw, for a while at least. … Safety wise a chainsaw without the chain is still VERY dangerous. The bar will get an edge from the chain passing over it. Not to mention swinging a flat piece of steel around.

Can a chainsaw cut through dirt?

Don’t Cut Into Dirt

In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Plus, dirt wears the sprocket at the bar tip.

Does Stihl make a trencher?

Professional Bed Redefiners | Landscape Edgers & Trenchers | STIHL USA.

What happens if you put a chainsaw blade on backwards?

When replacing the chain on your chainsaw is to make sure that the cutting part of your chain is facing the right direction. Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut.

THIS IS INTERESTING:  What do I need for a tow truck business?

What is the best tool for digging a trench?

There are four types of hand tools used for trenching. They are the SharpShooter Shovel (or Drainage Spade), a couple different types of Trenching Shovels, the new Bottom Digger clean-out scoop, and the surprising Trenching Hoe (also called a Grub Hoe).

Why does my chainsaw chain dull so quickly?

If your chain dulls quickly, then it could be a couple of things. … Your chain will cut too deep or barely cut at all if your rakers or depth gauges are filed down too much or not enough, respectively. Get yourself a depth gauge appropriate for your saw and use it every time you sharpen your chain.

What should you not do with a chainsaw?

Don’t ever run while carrying a chainsaw. Do try to avoid cutting with the blade tip, this will also help avoid kickback. Do try cut below shoulder height wherever possible. This will keep a chainsaw away from your face in the event of kickback.

Should you run a chainsaw at full throttle?

Chainsaws come with a chain break to prevent any injury that may occur from a kickback. To prevent a kickback while working, you should: Apply full throttle before cutting. Avoid using the top of the chainsaw.

Do they make a handheld trencher?

GeoRipper MiniTrencher GR620, Handheld and Lightweight Mini Trencher That Offers Portability and Fast Digging Capabilities for Landscaping and Irrigation Applications.

Will a Ditch Witch cut through tree roots?

A small, walk-behind gasoline trencher will rip up roots up to about 2 inches in diameter, the bigger “Ditch Witch” trenchers with diesel engines can handle much larger roots (and it will actually “chew” through roots that won’t rip out… much more chewing than cutting).

THIS IS INTERESTING:  How much rock does a tri axle dump truck hold?

How do you know if your chainsaw is on backwards?

As you run your hand along the blade feel which way hooks you. On the upper half, it should hook you hand as you run it toward you. On the lower half, it will hook your hand as you run it away from you. If your chainsaw is on backwards or is simply blunt take the saw to a sharpening expert.

How tight should chainsaw blade be?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.

Special equipment and operation