How much diesel does a bulldozer use per hour?

A Caterpillar D6 dozer is said to burn between 3.5 gal. (13.3 L) and 6.5 gal. (24.7 L) of diesel an hour when operating under moderate conditions. Fuel consumption of larger dozers like the D11 can be five times that much.

How much fuel does a D11 dozer use?

Fuel Tank Capacities

Fuel Tank – Total Volume 500 gal (US) 1895 l
Fuel Tank – Usable Volume 475 gal (US) 1800 l

How much fuel does an excavator use per hour?

It all depends on the excavator. A cat 330 will use between 10 and 14 gallons per hour. And an Hitachi 350 or Komatsu 300 will use between 5 and 8 gallons per hour.

How much does a bulldozer work per hour?

What are typical Dozer wet and dry hire rates (by size)?

Dozer Size Dry Hire Rate Wet Hire Rate
D6 Dozer $180 per hour $260 per hour
D7 Dozer $200 per hour $280 per hour
D8 Dozer $325 per hour $400 per hour
D9 Dozer $430 per hour $510 per hour
THIS IS INTERESTING:  You asked: How do I choose a mini excavator?

How much fuel does a diesel engine burn per hour?

Likewise, a well-maintained diesel engine burns about 0.4 pounds of fuel per hour for each unit of horsepower it produces.

How much can a D11 push?

The current D11T was introduced in early 2008 and is also 850 hp (630 kW). This comes as a regular bulldozer and a carrydozer like the previous model. As with the D11R, the D11T Carrydozer can push 57.9 yards (52.9 m) while the regular D11T can push 45 yards (41 m) of earth.

How much does a D11 dozer cost?

CAT D11 Price: Older used models go for as little as $85,000 with no add-ons but can cost $1 million or more for more recent used models, depending on features. New model pricing starts at around $2.2 million.

How much fuel does a bobcat use per hour?

A Bobcat T190 is more equivalent and those run at about 2 gallons per hour full throttle.

How many hours is a lot for an excavator?

I think the ‘sweet spot’ for value on an excavator is somewhere in the 2000-3000 hour area, and then the 6-8000 hour area. Over 10000 can still be a good machine, but could be close to a 15k engine or pump, plus most 10k on up machines I see the u/c is getting weak.

How much fuel does a dozer use per hour?

A Caterpillar D6 dozer is said to burn between 3.5 gal. (13.3 L) and 6.5 gal. (24.7 L) of diesel an hour when operating under moderate conditions. Fuel consumption of larger dozers like the D11 can be five times that much.

THIS IS INTERESTING:  What is the average wage for a excavator operator?

Can a bulldozer remove stumps?

A bulldozer can remove stumps if it has a strong enough motor. Dig a trench that’s three feet wide and eight feet deep on all sides of it. Use the bulldozer to push the stump until the roots pull out of the ground. Lift and push the loose stump and grind it down or chop it up to dispose of it.

How many hours will a dozer last?

Cat say that most components are good for 10,000 hrs under average operating conditions. That drops to 7500 hrs under severe conditions, and can go out to 17,000-18,000 hrs under moderate working conditions, with good care.

How much money do bulldozer operators make?

Bulldozer operators, for example, earn a median salary of more than $35,000 with the upper ranges reaching $43,000. Excavator operators can range from $42,000 to $55,000 according to recent data.

How do you calculate diesel per hour?

Simple Method

  1. Formula To Estimate Maximum Engine Fuel Consumption. Gallon Per Hour (GPH) = (specific fuel consumption x HP)/Fuel Specific Weight. …
  2. 300-hp Diesel Engine Example. GPH = (0.4 x 300)/ 7.2 = 105/7.2 = 16.6 GPH.
  3. 300-hp Gasoline Engine Example. GPH = (0.50 x 300)/ 6.1 = 150/6.1 = 24.5 GPH.
  4. Other Related Resources:

23.04.2015

How many kWh is a Litre of diesel?

One litre of diesel fuel (auto) has an energy content of approximately 38 MJ – which approximates to 10 kWh (using a ballpark figure) but the efficiency of conversion into kinetic energy is only about 30% – that is better than petrol which is typically 25% depending on the design.

How do you calculate diesel?

Divide the number of miles driven by the amount of fuel used in litres (miles per litre) To convert the figure to miles per gallon multiply it by 4.544.

How To Calculate Your Fuel Consumption

  1. Your mileage since the last fill.
  2. The number of litres of fuel you put in.
  3. The cost per litre of fuel.
THIS IS INTERESTING:  How do you calculate fuel consumption for a truck?
Special equipment and operation