Question: How much does a dump truck load of asphalt cost?

The cost of asphalt ranges from $3 to $5 per square foot, including labor.

How many tons of asphalt are in a dump truck?

How much can you deliver in one truck? Our largest single dump truck can hold up to 20 tons in a load or 20 cubic yards of mulch.

How much does a truckload of asphalt cost?

Bulk asphalt cost per truckload

A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.

How much does it cost to pave 1000 square feet?

This is going to be one of the least expensive options of paving stones. Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax.

Pavers.

THIS IS INTERESTING:  What is the difference between a backhoe and an excavator?
Total pavers (including waste) 1,000 sq ft + 10% waste 1,100 sq ft of pavers
Pavers cost per square foot $3,419.06 ÷ 1,000 sq ft $3.42/sq ft

What is the average cost of asphalt per square foot?

Cost. Ignoring any maintenance costs, asphalt is generally much cheaper to install than concrete. On average, the cost per square foot for asphalt will run between $2.50 to $4.00. Fluctuations in crude oil prices can cause fluctuations in asphalt prices but the price will remain around this range.

How much is a ton of crushed asphalt?

One ton of asphalt millings covers 80 square feet at a few inches thick. A ton costs between $7 and $60, depending on the amount of recycled asphalt pavement in the mixture.

How much will a ton of asphalt cover?

One ton of asphalt covers about 80 square feet with 2 inches of material or 160 square feet with 1 inch of material.

What’s cheaper asphalt or gravel?

Asphalt driveways typically cost $2 – $5 per sq foot to install – more than gravel, but much less than many other options.

Is it OK to put new asphalt over old asphalt?

The short answer is yes, you can put new asphalt over old asphalt. This can add several years to the surface. An asphalt overlay can last between eight to fifteen years on the surface. When applying asphalt over an old layer, make sure the new layer is at least 1.5 times thicker than the old one.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

THIS IS INTERESTING:  How many carbs are in a concrete mixer?

Is asphalt the same as blacktop?

Although people use the terms interchangeably, there is a difference between the two. The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.

Is 2.5 inches of asphalt enough for a driveway?

The Intended Use of the Pavement

Thus, a compacted asphalt thickness of 2.5 to 3 inches may be more than sufficient for a residential driveway, but a busy mixed-use lot may need a compacted asphalt thickness of 4 inches or more.

How can I pave a cheap driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

Is it cheaper to pave or concrete a driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.

Can you do asphalt yourself?

Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.

How long do asphalt driveways last?

Typically, an asphalt driveway lasts 15 to 30 years. This can vary depending on a number of factors including but not limited to: Proper Installation. Type of usage (residential or commercial)

THIS IS INTERESTING:  What is earth work excavation?
Special equipment and operation