# Quick Answer: How much does it cost for a dump truck load of gravel?

Contents

A truck load of gravel costs \$1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for \$46 per hour that spread 12 cubic yards per hour.

## How much will a dump truck load of gravel cover?

A 10-wheel dump truck carries 12 to 20 tons of gravel or around 8 to 10 yards depending on the rock size and type.

## How many tons of gravel can a dump truck hold?

A dump truck can hold anywhere from 13 to 25 tons of gravel, based on common sizes available for commercial use. Ten-wheelers are rated to reliably hold 13 tons, whereas the largest flat-bed trucks can contain 25 tons of gravel.

## What is the best size gravel for a driveway?

Gravel is typically graded by size, and most driveways use at least three different sizes of gravel that are put down in layers to create a solid foundation and ensure proper drainage. A popular choice for the bottom layer is #3 stone, which ranges in size from one to two inches in diameter.

## What is the cheapest gravel for a driveway?

Crush and run is one of the cheapest materials that can be used in a gravel driveway at about \$0.40 per square foot. Cost per cubic yard is about \$20 and per ton about \$28.

## How much does a 50 lb bag of gravel cover?

A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot.

## How do you calculate gravel for a driveway?

Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.

## How much does a ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

## What is crush run gravel?

Crush and run gravel is made from tiny pieces of gravel that is mixed with limestone. This is a useful top layer for gravel driveways because the limestone sticks together when wet, helping the driveway last longer. Crush and run gravel driveways are affordable and can last for years if they are properly maintained.

## How much gravel does a 10 wheel dump truck?

A dump truck can hold anywhere from 13 to 25 tons of gravel, based on common sizes available for commercial use. Ten-wheelers are rated to reliably hold 13 tons, whereas the largest flat-bed trucks can contain 25 tons of gravel.

THIS IS INTERESTING:  You asked: When should an excavation be battened back or stepped?

## How many ton of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

## What size is crush and run gravel?

Crusher run is crushed natural limestone, unlike crushed asphalt that is an oil product. Crusher run consists of 3/4″ particles plus a specific blend of stone dust. Crush n Run, also known as crusher run, is an aggregate mix of stone, gravel and dust.

## How many inches deep should a gravel driveway be?

The depth of the gravel can vary, but should be at least 4 to 6 inches. To determine this measurement in feet, divide the number of inches by 12 (for example, 6 inches is 0.5 feet). If you plan to do two to three layers, each layer will need to be 4 to 6 inches thick, so you will to calculate each layer separately.

## How many square feet will 7 tons of gravel cover?

A ton of gravel can cover anywhere from 20 square feet to 240 square feet depending on depth.

How many square feet does a ton of gravel cover?

PRODUCT COVERAGE RATE PER TON OF MATERIAL
4”-10” Rip Rap 30 Square Feet
2″-4″ Rip Rap 70 Square Feet
1”-3” Rip Rap 90 Square Feet
3/4”, 7/8,” 1” Screened Gravel 100 Square Feet @ 2” depth

## Do I need fabric under gravel driveway?

Is it really necessary to put fabric under my gravel driveway? Yes, if you want your driveway to last. Having geotextile fabric under your gravel driveway will prevent you from continually needing to add more aggregate base to your road since the rock will drop into the subgrade layer.

THIS IS INTERESTING:  Can you add a thumb to an excavator?

## How do I make my gravel driveway solid?

In order for your gravel driveway to have a solid and firm foundation, it needs to be carefully tamped or compacted down and all weeds, roots and other debris need to be removed. It’s also a good idea at this point to lay down a layer of landscaping fabric.