What is the auger on a snowblower?

Augers – Rotating paddles or serrated metal blades. Single stage snow blowers use rubber paddles to collect and throw snow in one motion, while two stage models have metal serrated augers that cut through deeper snow to feed the impeller.

How much is a snowblower auger?

MTD 753-04472 Rubber Auger Kit For 21-Inch Snow Blower

List Price: $53.88 Details
Price: $42.09
You Save: $11.79 (22%)

Why won’t the auger on my snowblower turn?

A broken shear pin is the most common reason the snowblower auger won’t turn properly so replace any broken shear pins. Worn or loose belts also prevent the snowblower auger from spinning. Check and adjust the belts and replace any broken or worn belts when you see the snowblower auger not turning.

Should a snowblower auger be turned by hand?

Thx. The only way to turn the auger is by turning the impeller (the “fan” at the bottom of the chute).

Why does only one side of my snowblower works?

If only one of the two augers on your snow blower will turn, it is likely that the shear pin that connects to the driveshaft has broken. … This is a safety mechanism designed to prevent damage to the gearbox and belts, as the shear pins take the brunt of the damage, should the augers hit something solid while turning.

THIS IS INTERESTING:  Can you put Heet in a snowblower?

What kind of oil goes in a snowblower gearbox?

Use a SAE 5W-30 automotive oil for models: 938022, 938024, 938025 & 938030 thru 938034. Older Ariens single stage snow throwers have 2-cycle engines that require mixing 2-cycle oil and gas.

What is auger control lever?

Auger Control Lever

Located on the left side of the upper handle, the Auger Control Handle is used to engage and disengage the augers. Squeeze the Auger Control Handle to engage the augers; release to disengage the augers.

Is a 2 stage snow blower worth it?

This type of snow blower is best if you have long, wide, or hilly driveway and the typical snowfall in your area exceeds 8 inches. If you have a gravel driveway, you’ll want a two-stage model, since its auger won’t contact the ground.

What is auger assisted drive?

With an auger-assisted drive system, the wear-resistant polymer auger makes contact with the ground, helping move the snowblower forward with little operator effort and cleaning down to the pavement. The auger assists to help push the snow out of the throwing chute.

Which way does a snowblower auger turn?

The auger should turn in the same direction as the wheels in forward. It pushes snow down, under the auger, and then up into the impeller. The flights of teh auger should tend to move snow towards the centre of the machine.

Special equipment and operation